Fliegen Works Inc. | Aeronautical Engineers – Portland, OR – USA

Fliegen Works Inc. | Aeronautical Engineers – Portland, OR – USA

Immersive Camera Mount on Bell 206 Helicopter

Summary: Design, prototype and production of camera mount and lowering system for Immersive camera.

Project Name: IMC 407 Immersive Camera Mount

Client: Immersive Media

Client Request: To design and build a system that would lower Immersive Media’s camera below an array of helicopters.  The camera must have a 360 degree clear view, and be able to lower and raise out of harms way on landing.

Project Summary: See Immersive Media Camera Mount for Bell 206 and Robinson R44 for more information.

Results: Fliegen Works has prototyped and designed a camera lowering system that can attach to most helicopter landing skids.  It is simple to install, failsafe, and provides a stable platform for the camera to have a full 360 degree view when lowered. Fliegen Works has completed certification after successful structural and flight tests.

FAA Approvals: STC approved for the Installation on the Bell 206, and the R44, PMA approval for manufacturing.

2010-03-31T14:37:58-07:00Camera Installations for Aerial Photography, Client Projects, Supplemental Type Certificate Projects (STC)|

Structural Substantiation, Cessna U206F, Cargo Restraint System

Summary: Design and DER work to substantiate the installation of two bulkheads and cargo nets to restrain bucket cargo in a Cessna 206 aircraft.

Project Name: Structural Substantiation, Cessna U206F, Cargo Restraint System

Client: Troutdale Aircraft Services

Client Request: To design and analyze a system to restrain buckets of agricultural cargo in the passenger area of a Cessna 206 aircraft.

Project Summary: Structural substantiation of modifications made to a Cessna U206F by removal of the passenger seats and installation of cargo restraints, including a bulkhead behind the pilot, a short bulkhead between the pilot and former co-pilot seat, multiple seat tracks installed for attachment of cargo fittings, and a series of cargo barrier nets.  In order to tie down the cargo nets and provide structure for the nets and bulkheads, seat track was installed along the sides and to the ceiling.

2010-03-31T14:00:28-07:00Cargo Conversions, Client Projects|

Tag Cloud

stc
Go to Top